RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0050285 REAR DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR OUTSIDE MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RH side and LH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 75078 1.REMOVE REAR DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY LH

HINT:

When removing the rear door lower outside moulding, heat the rear door panel and rear door lower outside moulding using a heatlight.


Standard:
Item Temperature
Rear Door Panel 40 to 60°C (104 to 140°F)
Rear Door Lower Outside Moulding 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the rear door panel and rear door lower outside moulding excessively.


a.
B338451

Detach the 6 clips.


b.
B338452

Remove the hole plug and nut.


c.
B340208
1.844,1.552 1.677,1.552 1.677,1.552 1.677,1.083 true 1.073,0.813 1.073,0.281 1.073,0.281 1.219,0.281 true 1.229,0.198 1.458,0.396 0.229,0.198 10 *1 1.875,1.469 2.063,1.646 0.188,0.177 10 *2
*1
*2
*1 Protective Tape
*2 Double-side Tape


Put protective tape around the rear door lower outside moulding sub-assembly LH.


d.

Using moulding remover D, remove the double-side tape to detach the 7 clips and remove the rear door lower outside moulding sub-assembly LH.

NOTICE:

Be careful not to damage the vehicle body.